PER RACE ENGINES

FORD 306CI LONGBLOCK

$3500

PER Race Engines built Ford 306ci Longblock

Ford 306CI longblock: pictures show valve covers, intake and oil pan, DOES NOT INCLUDE VALVE COVERS, INTAKE, OILPAN OR PICKUP) It does include the timing cover, harmonic balancer, and flexplate.
Rods: stock ford
Pistons: Probe flattop pistons
Bolts: ARP
Heads: World Products Heads (p/n 710032 casting number I-057 W J/R) See tech specs below.
Cam: Elgin Industries (see specs below)

Head Technical Specs:
Casting ID Number: I-058
Material: aluminum (according to World Products they are the same casting as the Iron windsor jr heads they currently list on their site, but they are aluminum)
Valve Seats: Intake (integral), exhaust (hardened)
Valve Guides: Integral cast iron
Spring Seats: Machined for 1.560" and 1.250"
Valves: Manley stainless steel valves in assemblies (inconel exhaust valves on marine applications)
Valve Diameter: 1.940" intake, 1.600" exhaust (11/32" stem)
Guide Plates: Special World part number 830460-8
Rocker Arm Studs: Screw-in style
Rocker Arms: Adjustable rockers recommended. 1.6 ratio (use of 1.73 ratio will require elongation of pushrod holes)
Intake Runner: 180cc, standard port location
Exhaust Ports: 64cc, standard location (dual exhaust bolt pattern to accommodate large custom headers)
Combustion Chamber: 58cc
Spark Plug: 14mm 5/8" .460" reach tapered style
Valve Job: Multi-angle intake and radiused exhaust
Valve Cover Rail: Raised
Valve Angle: Stock 20%
Accessory Bolt Holes: Stock
50-State Emissions legal
Spring Specs
1.250": 100 lbs. @ 1.810", 300 lbs. @ 1.250", coil bind @ 1.200", max lift @ .570"
1.437": 125 lbs. @ 1.810", 340 lbs. @ 1.210", coil bind @ 1.160", max lift @ .600"
1.550": 200 lbs. @ 1.900", 480 lbs. @ 1.200", coil bind @ 1.150", max lift @ .700"
Head Flow @ .600 Lift
236 intake, 169 exhaust (Super Flow 1050)
254 intake, 176 exhaust (Super Flow 600)

COMP RATIO 9.8
engine dyno numbers: hp 380 @ 6200 -- tq 334 @ 5100

All heads flowed with a standard .750" intake plate, without exhaust tube, and 28" of water.

Cam Details E-1018-P:

email or call: perraceengines@sbcglobal.net | 815-254-2333

PONTIAC 400CI SHORTBLOCK

$1800

Pontiac 400ci Shortblock Forged TRW pistons pn# L2262 040, all new rings/bearings/freeze p lugs, tq plate, neoprene rubber rear main seal
block date code: J193 (Oct 19, 1973) 204602
ring dimensions:5/16, 5/64, 3/16
dome shape: flat; 4 reliefs
compression dist.: 1.714
deck clearance.021
press type pin
.0020 skirt clearance

your head cc = compression ratio
69.0 = 10.28
72.0 = 9.98
87.0 = 8.74
96.0 = 8.14
111.0 = 7.33
114.0 = 7.19

E-mail or call: perraceengines@sbcglobal.net | 815-254-2333

TCI Ford SBF flexplate 11.5" bolt pattern 164 tooth

$75.00

Code: 529620 This is a brand new flexplate, was bolted to a motor but never started. No wear on the teeth at all.

TCI SFI APPROVED FLEXPLATE FOR FORD 289-302-351W-351C-351M-400M WITH 50 oz. BALANCE. For Ford applications, TCI® OEM-style small block flexplates are constructed to precise standards and are SFI 29.1 approved. Built extra-thick with welds on both sides of the ring gear, these flexplates are precision-balanced and checked for runout. 11.5" Bolt Pattern, 164-Tooth 50oz.

view this item on eBay | email or call: info@per-race-engines.com | 815-254-2333

347 - 4.030 BORE ROSS RACING PISTONS

$350

ROSS RACING PISTONS 347CI

Set of 8 Ross Racing Pistons, 6 are good and 2 are bad. One has a crack and the other some pitting in the top.

Ross Piston specs:
4.030 bore
.004 clearance
1.085 compression height
12:1 w/ 64cc head
20? head
build number for the pistons 60554
Rings are included for all 8 pistons. Total Seal Rings -.043 / .043 / 3mm

E-mail or call: perraceengines@sbcglobal.net | 815-254-2333

CANTON SBC chevy PICKUP CT STANDARD 7" PAN (CAN20-040)

$20.00

GOOD CANTON RACING PRODUCTS OIL PUMP PICK-UP
Small block chevy oil pump pick-up standard volume 7" pan.
This item was installed then removed prior to use.

Pickup Installation Press fit
Tube Diameter (in) 0.625 in.

view this item on eBay | email or call: info@per-race-engines.com | 815-254-2333

CP PISTONS set of 8 LS1009 LS1 LS2 LS6 LSX

$500.00

Set of eight (8) CP Pistons - shelf part # LS1009

Small Block Chevy LS1: SBC LS1 Flat Top & Dish; Designed on X-style forging to clear reluctor wheel; Fit LS1, LS2 and LS6 heads; Designed for shorter wrist pins; Pinfitting included at no cost; Chamfered pins and wire locks included; Accumulator and anti-detonation grooves included; Designed for back-cut rings; Double pin oilers, force fed from oil ring; Pick lock grooves for easy lock removal; Custom skirt cam and barrel shapes; Supplied with Wire Locks and 927*2.250 Pin (106g); Bore Diameter: 3.905; clearance: 0.0030; Compression Height: 1.105; Piston size at gauge point 0.5" up from bottom of skirt: 3.902; top groove width: 0.06; 2nd groove width: 0.06; 3rd groove width: 0.119; top groove diameter: 3.508; 2nd groove diameter 3.504; 3rd groove diameter: 3.55; Intake valve relief: -0.15; exhaust valve relief: -.100; Dome height: 0; Pin diameter: .927; pin lenght: 2.25; lock type: .073 wire; Gram wight 366; cam profile: CP33

view this item on eBay | email or call: info@per-race-engines.com | 815-254-2333

Vortech supercharger 8-Rib Metal Idler Pulley 2 1/2"

$30.00

4FK016-021

Vortech Metal Idler Pulley (2 1/2").
Replacement Idler Pulley used in Vortech Supercharger Kits.

Pulley is used in the following vehicles:
1996-1999 Ford Cobra with 4.6L
1997-2002 Ford Truck with 4.6L
1994-2001 Acura Integra with 1.8L
1999-2000 Honda Civic SI

view this item on eBay | email o r call: info@per-race-engines.com | 815-254-2333

OEM BBC Hydraulic Roller Lifters

$80.00

GOOD USED ENGINE PARTS

OEM Lifters out of a bbc. Hydraulic Roller. Set of 16.

view this item on eBay | email or call: info@per-race-engines.com | 815-254-2333

SUPERWINCH GP1800

$200.00

SUPERWINCH GP1800 1800LB capacity general purpose Standard Features: Powers Load IN and OUT, Mechanical and Dynamic Brake, Full-metal Planetary Gear-train, Freespooling Clutch for Fast Wire Rope Payout, High Efficiency Low Amp Draw Motor, Commercial Grade Contactor Pre-mounted and Sealed Against the Elements, Circuit Breaker Protected, Durable Handheld Remote Switch on 15' Lead, Cable Tension Plate
Specifications: Rated Line Pull (Bottom Layer)1,800 lb. (816 kg), Motor0.71 hp (12V DC), GearingDifferential Planetary, Gear Ratio- 153:1, Freespooling Clutch - Pull and Turn, Braking - Mechanical and Dynamic, Wire Rope - 5/32" x 60' (3.9mm x 18.2m) with Latched Hook, Dimensions - 12.5"l. x 3.9"d. x 4.1"h., (317.5mm l. x 100mm d. x 104mm h.), Drum Diameter - 1.25" (31.8mm), Drum Length - 2.9" (73.7mm), Weight - 13 lb. (5.9 kg), Switching Method - 15' Handheld Remote, Switching Mechanism - Commercial Grade Contactor, Pulley Block - Standard, Color-Coded Wiring-Yes

12 volts dc. Part number 1318200. Serial number 465523. This is almost brand new, its been out of the box and tested out but never put on anything to actually use it. It has everything included with it that came with it. Including the instructions.

email or call: | 815-254-2333